SSC JE Syllabus 2019: SSC JE Paper 1 And Paper 2 Syllabus, Download PDF! (All Engineering Branches)

SSC JE Syllabus 2019 : SSC JE Paper 1 And Paper 2, Download PDF ( All Engineering Branches )

SSC JE Notification 2019 : The Staff Selection Commission or SSC conducts the SSC JE exam for the recruitment of Junior Engineers. The exam is conducted once in a year. The detailed SSC JE Notification has been announced o the official website. SSC JE written exam is conducted in two phases- Tier I (Paper I) and Tier II (Paper II). Candidates can visit the official website and can start applying from 1st February 2019 and the last date to apply is 25th February 2019.

SSC conducts the JE exam. so as to select the best Junior Engineers in departments like the Central Water Commission, Central Public Works Department, Military Engineering Services and Department of Posts. A wide range of posts come under SSC JE.

The standard of the questions in Engineering subjects will be approximately of the level of  Diploma in Engineering (Civil/ Electrical/ Mechanical) from a recognized Institute, Board or University recognized by All India Board of Technical Education. The details of the syllabus are given below :

SSC JE Syllabus:

SSC JE 2019 Exam Pattern

Paper 1 will be divided in three sections namely, General Intelligence and Reasoning, General Awareness and Part A (Civil), Part B (Electrical) and Part C (Mechanical). There is a negative mark of 0.25 marks for each wrong answer in Paper I

Read Also :

SSC JE Paper I Exam Pattern is given below:

PapersMode of ExaminationSubjectMaximum MarksDuration & Timings
Paper-I Objective typeComputer Based Test
General Intelligence & Reasoning
2 Hours Morning shift [10.00 AM to 12.00 Noon] Afternoon Shift [2.00 PM to 4.00 PM]
General Awareness50
Part – A General Engineering (Civil & Structural) Or Part-B General Engineering (Electrical) Or Part-C General Engineering (Mechanical)

SSC JE Paper II Exam Pattern 2019

The paper-II is a conventional type paper which is to be held in offline mode. It comprises of Part-A General Engineering (Civil & Structural) or Part- B General Engineering (Electrical) or Part-C General Engineering (Mechanical).

The SSC JE exam pattern of Paper-II is given below:

PaperMode of examSubjectsTotal MarksTime Duration
Paper-II Conventional TypeWritten
Part-A General Engineering (Civil & Structural) Or Part- B General Engineering (Electrical) Or Part-C General Engineering (Mechanical)
3 hours

SSC JE Syllabus 2019:

General Intelligence & Reasoning
  • Questions on analogies, similarities, differences, space visualization, problem solving, analysis, judgment,
  • decision making, visual memory, discrimination, observation, relationship concepts, arithmetical reasoning,
  • Verbal and figure classification, arithmetical number series etc.
  • Questions designed to test the candidate’s abilities to deal with abstract ideas and symbols and their relationships,
  • Arithmetical computations and other analytical functions.
General AwarenessQuestions relating to India and its neighboring countries especially pertaining to History, Culture, Geography, Economic Scene, General Polity and Scientific Research, etc.
General Engineering (Civil)Part-A: Civil Engineering
  • Building Materials, Estimating,
  • Costing and Valuation,
  • Surveying, Soil Mechanics,
  • Hydraulics,
  • Irrigation Engineering,
  • Transportation Engineering,
  • Environmental Engineering.
  • Structural Engineering: Theory of Structures,
  • Concrete Technology,
  • RCC Design, Steel Design.
General Engineering (Electrical)Part-B: Electrical Engineering
  • Basic concepts,
  • Circuit law,
  • Magnetic Circuit,
  • AC Fundamentals,
  • Measurement and Measuring instruments,
  • Electrical Machines,
  • Fractional Kilowatt Motors and single phase induction Motors,
  • Synchronous Machines,
  • Generation, Transmission and Distribution,
  • Estimation and Costing, Utilization and Electrical Energy,
  • Basic Electronics.
General Engineering (Mechanical)
Part C: Mechanical Engineering
  • Theory of Machines and Machine Design,
  • Engineering Mechanics and Strength of Materials,
  • Properties of Pure Substances,
  • 1st Law of Thermodynamics,
  • 2nd Law of Thermodynamics,
  • Air standard Cycles for IC Engines,
  • IC Engine Performance,
  • IC Engines Combustion,
  • IC Engine Cooling & Lubrication,
  • Rankine cycle of System,
  • Boilers,
  • Classification,
  • Specification,
  • Fitting & Accessories,
  • Air Compressors & their cycles,
  • Refrigeration cycles,
  • Principle of Refrigeration Plant,
  • Nozzles & Steam Turbines.
  • Properties & Classification of Fluids,
  • Fluid Statics,
  • Measurement of Fluid Pressure,
  • Fluid kinematics,
  • Dynamics of Ideal fluids,
  • Measurement of Flow rate,
  • basic principles,
  • Hydraulic Turbines,
  • Centrifugal Pumps,
  • Classification of steels.

SSC JE Syllabus 2019 Paper II

Part A – Civil & Structural Engineering

Building Materials
  • Physical and Chemical properties,
  • classification, standard tests,
  • uses and manufacture/quarrying of materials e.g. building stones, silicate based materials, cement (Portland),
  • asbestos products, timber and wood based products,
  • laminates, bituminous materials, paints, varnishes
Estimating, Costing and Valuation
  • estimate, glossary of technical terms,
  • analysis of rates, methods and unit of measurement,
  • Items of work – earthwork, Brick work (Modular &Traditional bricks),
  • RCC work, Shuttering, Timber work, Painting, Flooring, Plastering.
  • Boundary wall, Brick building, Water Tank, Septic tank, Bar bending schedule,
  • Center line method, Mid-section formula, Trapezoidal formula,
  • Simpson’s rule.
  • Cost estimate of Septic tank, flexible pavements, Tube well, isolates and combined footings, Steel Truss, Piles and pile-caps.
  • Valuation – Value and cost, scrap value, salvage value, assessed value, sinking fund, depreciation and obsolescence, methods of valuation.
  • Principles of surveying, measurement of distance, chain surveying, working of prismatic compass,
  • compass traversing, bearings, local attraction,
  • plane table surveying, theodolite traversing, adjustment of theodolite, Leveling,
  • Definition of terms used in leveling, contouring, curvature and refraction corrections,
  • temporary and permanent adjustments of dumpy level,
  • methods of contouring, uses of contour map,
  • tachometric survey, curve setting, earth work calculation, advanced surveying equipment
Soil Mechanics
  • Origin of soil,
  • phase diagram,
  • Definitions-void ratio,
  • porosity, degree of saturation,
  • water content, specific gravity of soil grains, unit weights,
  • density index and interrelationship of different parameters,
  • Grain size distribution curves and their uses.
  • Index properties of soils, Atterberg’s limits, ISI soil classification and plasticity chart. Permeability of soil,
  • coefficient of permeability, determination of coefficient of 12 permeability,
  • Unconfined and confined aquifers, effective stress, quick sand, consolidation of soils,
  • Principles of consolidation, degree of consolidation, pre-consolidation pressure, normally consolidated soil,
  • E-log p curve, computation of ultimate settlement.
  • Shear strength of soils, direct shear test, Vane shear test, Triaxial test.
  • Soil compaction, Laboratory compaction test, Maximum dry density and optimum moisture content, earth pressure theories, active and passive earth pressures,
  • Bearing capacity of soils, plate load test, and standard penetration test.
  • Fluid properties,
  • hydro statics,
  • measurements of flow,
  • Bernoulli’s theorem and its application, flow through pipes,
  • flow in open channels,
  • weirs, flumes, spillways, pumps and turbines
Irrigation Engineering
  • Definition, necessity, benefits, effects of irrigation, types and methods of irrigation,
  • Hydrology – Measurement of rainfall, run off coefficient, rain gauge, losses from precipitation – evaporation, infiltration, etc.
  • Water requirement of crops, duty, delta and base period, Kharif and Rabi Crops, Command area, Time factor, Crop ratio, Overlap allowance, Irrigation efficiencies.
  • Different type of canals, types of canal irrigation, loss of water in canals.
  • Canal lining – types and advantages.
  • Shallow and deep to wells, yield from a well.
  • Weir and barrage, Failure of weirs and permeable foundation, Slit and Scour, Kennedy’s theory of critical velocity.
  • Lacey’s theory of uniform flow. Definition of flood, causes and effects, methods of flood control, water logging, preventive measure.
  • Land reclamation, Characteristics of affecting fertility of soils, purposes, methods, description of land and reclamation processes.
  • Major irrigation projects in India
Transportation Engineering
  • Highway Engineering – cross sectional elements, geometric design, types of pavements, pavement materials – aggregates and bitumen, different tests,
  • Design of flexible and rigid pavements – Water Bound Macadam (WBM) and Wet Mix Macadam (WMM), Gravel Road, Bituminous construction,
  • Rigid pavement joint, pavement maintenance, Highway drainage, Railway Engineering- Components of permanent way – sleepers, ballast,
  • Fixtures and fastening, track geometry, points and crossings, track junction, stations and yards.
  • Traffic Engineering – Different traffic survey, speed-flow-density and their interrelationships, intersections and interchanges, traffic signals, traffic operation, traffic signs and markings, road safety
Environmental Engineering
  • Quality of water,
  • source of water supply, purification of water,
  • distribution of water, need of sanitation, sewerage systems,
  • circular sewer, oval sewer, sewer appurtenances,
  • sewage treatments. Surface water drainage.
  • Solid waste management – types, effects, engineered management system.
  • Air pollution – pollutants, causes, effects, control. Noise pollution – cause, health effects, control.

Structural Engineering

Theory of Structures
  • Elasticity constants,
  • types of beams – determinate and indeterminate,
  • bending moment and shear force diagrams of simply supported,
  • cantilever and over hanging beams.
  • Moment of area and moment of inertia for rectangular & circular sections,
  • bending moment and shear stress for tee,
  • channel and compound sections,
  • chimneys, dams and retaining walls
Concrete Technology
  • Properties, Advantages and uses of concrete,
  • cement aggregates, importance of water quality,
  • water cement ratio, work ability, mix design,
  • storage, batching, mixing, placement,
  • compaction, finishing and curing of concrete,
  • quality control of concrete, hot weather and cold weather concreting,
  • repair and maintenance of concrete structures
RCC Design
  • RCC beams-flexural strength,
  • shear strength, bond strength,
  • design of singly reinforced and double reinforced beams,
  • Cantilever beams. T-beams, lintels.
  • One way and two way 12 slabs, isolated footings.
  • Reinforced brick works, columns, staircases, retaining wall,
  • water tanks (RCC design questions may be based on both Limit State and Working Stress methods)
Steel Design
  • Steel design and construction of steel columns,
  • beams roof trusses plate girders

SSC JE Syllabus- Part B – Electrical Engineering

Basic Concepts
  • Concepts of resistance,
  • inductance,
  • Capacitance and various factors affecting them.
  • Concepts of current, voltage, power, energy and their units
Circuit Law
  • Kirchhoff’s law,
  • Simple Circuit solution using network theorems
Magnetic Circuit
  • Concepts of flux, mmf, reluctance,
  • Different kinds of magnetic materials,
  • Magnetic calculations for conductors of different configuration e.g. straight, circular, solenoid, etc.
  • Electromagnetic induction, self and mutual induction
AC Fundamentals
  • Instantaneous, peak, R.M.S. and average values of alternating waves,
  • Representation of sinusoidal wave form, simple series and parallel AC Circuits consisting of R.L. and C, Resonance, Tank Circuit.
  • Poly Phase system – star and delta connection,
  • 3 phase power,
  • DC and sinusoidal response of R-Land R-C circuit
Measurement & Measuring Instruments
  • Measurement of power (1 phase and 3 phase, both active and re-active) and energy,
  • 2 wattmeter method of 3 phase power measurement.
  • Measurement of frequency and phase angle.
  • Ammeter and voltmeter (both moving oil and moving iron type), extension of range watt-meter, Multimeters, Megger, Energy meter AC Bridges.
  • Use of CRO, Signal Generator, CT, PT and their uses. Earth Fault detection

SSC JE Syllabus- Electrical Machines:

D.C. Machine
  • Construction,
  • Basic Principles of D.C. motors and generators, their characteristics, speed control and starting of D.C. Motors.
  • Method of braking motor,
  • Losses and efficiency of D.C. Machines
1 phase and 3 phase transformers
  • Construction and Principles of operation,
  • equivalent circuit,
  • voltage regulation,
  • O.C. and S.C. Tests,
  • Losses and efficiency.
  • Effect of voltage,
  • Frequency and wave form on losses.
  • Parallel operation of 1 phase /3 phase transformers.
  • Auto transformers, 3 phase induction motors,
  • rotating magnetic field,
  • principle of operation,
  • equivalent circuit,
  • torque-speed characteristics,
  • Starting and speed control of 3 phase induction motors.
  • Methods of braking,
  • effect of voltage and frequency variation on torque speed characteristics
Synchronous Machines
  • Generation of 3-phase e.m.f. armature reaction,
  • voltage regulation,
  • parallel operation of two alternators,
  • synchronizing,
  • control of active and reactive power.
  • Starting and applications of synchronous motors
Generation, Transmission and Distribution
  • Different types of power stations,
  • Load factor,
  • diversity factor,
  • demand factor,
  • cost of generation,
  • Inter-connection of power stations.
  • Power factor improvement,
  • various types of tariffs,
  • types of faults,
  • Short circuit current for symmetrical faults.
  • Switch gears – rating of circuit breakers,
  • Principles of arc extinction by oil and air,
  • H.R.C. Fuses,
  • Protection against earth leakage / over current, etc
Estimation and Costing
  • Estimation of lighting scheme,
  • Electric installation of machines and relevant IE rules.
  • Earthing practices and IE Rules.
Utilization of Electrical Energy
  • Illumination,
  • Electric heating,
  • Electric welding,
  • Electroplating,
  • Electric drives and motors
Basic Electronics
  • Working of various electronic devices e.g. P N Junction diodes, Transistors (NPN and PNP type),
  • BJT and JFET

SSC JE Syllabus- Part C – Mechanical Engineering

Theory of Machines and Machine Design
  • Concept of simple machine,
  • Four bar linkage and link motion,
  • Flywheels and fluctuation of energy,
  • Power transmission by belts – V-belts and Flat belts,
  • Clutches – Plate and Conical clutch,
  • Gears – Type of gears, gear profile and gear ratio calculation,
  • Governors – Principles and classification,
  • Riveted joint,
  • Cams,
  • Bearings,
  • Friction in collars and pivots
Engineering Mechanics & Strength of Materials
  • Equilibrium of Forces,
  • Law of motion,
  • Friction,
  • Concepts of stress and strain,
  • Elastic limit and elastic constants,
  • Bending moments and shear force diagram,
  • Stress in composite bars,
  • Torsion of circular shafts,
  • Bucking of columns – Euler’s and Rankin’s theories,
  • Thin walled pressure vessels
Thermal Engineering
  • Properties of Pure Substances P-V & P-T diagrams of pure substance like H2O,
  • Introduction of steam table with respect to steam generation process;
  • Definition of saturation wet & super heated status.
  • Definition of dryness fraction of steam, degree of super heat of steam.
  • H-S chart of steam (Mollier Chart)
Properties & Classification of Fluid
  • Ideal & real fluids,
  • Newton’s law of viscosity,
  • Newtonian and Non-Newtonian fluids,
  • compressible and in compressible fluids
Fluid Statics
  • Pressure at a point.
  • Measurement of Fluid
  • Manometers,
  • U-tube,
  • Inclined tube
Fluid Kinematics
  • Stream line, laminar & turbulent flow,
  • external & internal flow,
  • continuity equation
Dynamics of Ideal Fluids
  • Bernoulli’s equation,
  • Total head;
  • Velocity head;
  • Pressure head;
  • Application of Bernoulli’s equitation
Centrifugal Pumps
  • Classifications,
  • Principles,
  • Performance
Production Engineering Classification of Steels
  • Mild steal & alloy steel,
  • Heat treatment of steel,
  • Welding – Arc Welding,
  • Gas Welding,
  • Resistance Welding,
  • Special Welding Techniques i.e. TIG, MIG, etc. (Brazing & Soldering),
  • Welding Defects & Testing;
  • NDT, Foundry & Casting – methods, defects, different casting processes

SSC JE Important Links :

SSC JE Recruitment NoticeClick Here
SSC JE Official LinkClick Here
SSC Study materialsClick Here
SSC JE ResultClick Here
SSC JE Answer KeyClick Here
SSC JE Cut OffClick Here
Best Books for SSC Junior Engineer ExamClick Here
SSC JE SalaryClick Here
SSC JE Admit CardClick Here
SSC JE SyllabusClick Here
SSC JE Previous Year Question PaperClick Here
SSC Online ApplicationClick Here
SSC JE Exam PatternClick Here
ssc je syllabus 2019 ssc je syllabus 2019 pdf ssc je syllabus 2019 pdf download civil engineering ssc je syllabus pdf 2019 ssc je civil syllabus 2019 pdf download ssc je syllabus 2019 pdf download ssc je civil syllabus 2019 pdf download ssc je syllabus 2019 pdf download mechanical ssc je 2019-20 syllabus ssc je 2019 

No comments:

Post a Comment